Laptop Backup Power

• Extendable runtime
  Connect additional batteries to your UPS to provide extended runtime in the event of a power outage.
• Hot-swappable batteries
  Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
• Lifetime data recovery warranty
  Provides peace of mind by providing professional data recovery services in the event data is lost due to the failure of the unit.
• Building Wiring Fault Indicator
  This LED informs users of potentially dangerous wiring problems in the wall circuit.

• Green mode

• Battery failure notification

• Power-saving outlets

• Resettable circuit breaker

• Battery-protected and surge-only outlets

• Cold-start cable

• Hot-swappable batteries

• Disconnected battery notification

• Dataline surge protection

• Automatic self-test

• Adjustable voltage-transfer points

• Adjustable voltage sensitivity

• Audible alarms

• User-replaceable batteries

• USB connectivity

• Serial connectivity

• Transformer-block spaced outlets

• Boost and Trim Automatic Voltage Regulation (AVR)

• Intelligent battery management

• Safety-agency approved

• Building Wiring Fault Indicator

• Battery replacement without tools

• LCD graphics display

• Audible alarms
  Provides notification of changing utility power and UPS power conditions

• Automatic self-test
  Periodic battery self-test ensures early detection of a battery that needs to be replaced.

• Battery replacement without tools
  Enables fast battery replacement, lowering Mean Time to Repair (MTTR).

• Boost and Trim Automatic Voltage Regulation (AVR)
  Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).

• Building Wiring Fault Indicator
  This LED informs users of potentially dangerous wiring problems in the wall circuit.

• Catastrophic Event Protection
  SurgeArrest components such as MOVs and Thermal fuse ensure instantaneous reaction to lightning strikes and wiring faults. If the surge components are damaged due to power spike or over voltage, excess power cannot reach your equipment. Unlike the APC SurgeArrest products, most surge suppressors continue to let power through even after circuits have been damaged, leaving your equipment exposed to other damaging surges.

• Dataline surge protection
  Provides protection of connected equipment from power surges on the data lines.

• EMI and RFI noise filtering
  Reduces line noise that can cause data loss and keyboard errors.

• ENERGY STAR for UPS
  Establishes that the efficiency of the UPS is in the top 25% of the market as verified by third party testing

• Hot-swappable batteries
  Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

• LCD graphics display
  Text and mimic diagrams that display modes of operation, system parameters and alarms.

• Lifetime data recovery warranty
  Provides peace of mind by providing professional data recovery services in the event data is lost due to the failure of the unit.

• Performance Gaming Design
  Specially designed for performance gaming equipment, this battery backup protects gaming PCs, consoles and accessories from damaging power surges, interruptions and outages.

• PowerChute Personal Edition OS Compatibility
  This software supports numerous operating systems and processors. /a

• Sine wave output
  Eliminates humming and heat generated when powering tube lights and fans

• USB charging ports
  Simultaneously charge mobile devices, including smartphones and tablets.

• User-replaceable batteries
  Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

• Battery failure notification

• Resettable circuit breaker

• Battery-protected and surge-only outlets

• Cold-start cable

• Hot-swappable batteries

• Disconnected battery notification

• Dataline surge protection

• Automatic self-test

• Audible alarms

• User-replaceable batteries

• USB connectivity

• Transformer-block spaced outlets

• Intelligent battery management

• Safety-agency approved

• Battery replacement without tools

• LED status indicators

• Building Wiring Fault Indicator
  This LED informs users of potentially dangerous wiring problems in the wall circuit.

• Cold-start capable
  Provides temporary battery power when the utility power is out.

• Dataline surge protection
  Provides protection of connected equipment from power surges on the data lines.

• Disconnected battery notification
  Warns when a battery is not available to provide backup power.

• Hot-swappable batteries
  Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

• Lifetime data recovery warranty
  Provides peace of mind by providing professional data recovery services in the event data is lost due to the failure of the unit.

• Simple battery replacement
  Increases UPS availability by allowing quick, easy battery replacement.

• Transformer-block spaced outlets
  Protect equipment with input transformer blocks without blocking access to other receptacles.

• USB connection
  Use your PC to access additional power protection and management features for your UPS via a USB Port.

• Catastrophic event protection
  SurgeArrest components such as MOVs and Thermal fuse ensure instantaneous reaction to lightning strikes and wiring faults. If the surge components are damaged due to power spike or over voltage, excess power cannot reach your equipment. Unlike the APC SurgeArrest products, most surge suppressors continue to let power through even after circuits have been damaged, leaving your equipment exposed to other damaging surges.

• EMI and RFI noise filtering
  Reduces line noise that can cause data loss and keyboard errors.

• Battery and surge protected outlets
  Back up and protect your hardware and data during power outages, surges and spikes.

• USB charging ports
  Simultaneously charge mobile devices, including smartphones and tablets.

• Alarm notification
  Customers are notified in real-time via phone or e-mail as critical events occur, allowing them to reduce mean time to recovery, improve efficiency and maximize uptime.

• RoHS
  Certifies that electronic devices don't contain hazardous metals and flame retardants.

• ENERGY STAR for UPS
  Establishes that the efficiency of the UPS is in the top 25% of the market as verified by third party testing.

• User-replaceable batteries
  Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR).

• Audible alarms
  Provides notification of changing utility power and UPS power conditions.

• Automatic self-test
  Periodic battery self-test ensures early detection of a battery that needs to be replaced.

• Battery replacement without tools
  Enables fast battery replacement, lowering Mean Time to Repair (MTTR).

• LCD graphics display
  Text and mimic diagrams that display modes of operation, system parameters and alarms.

• Hot-swappable batteries
  Ensures clean, uninterrupted power to protected equipment while batteries are being replaced.

• Building wiring fault indicator
  This LED informs users of potentially dangerous wiring problems in the wall circuit.

• Dataline surge protection
  Provides protection of connected equipment from power surges on the data lines.

• Sine wave output
  Eliminates humming and heat generated when powering tubelights and fans.

• Adjustable voltage sensitivity
  Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.

• Audible alarms
  Provides notification of changing utility power and UPS power conditions

• Automatic self-test
  Periodic battery self-test ensures early detection of a battery that needs to be replaced.

• Battery failure notification
  Provides early-warning fault analysis on batteries enabling timely preventive maintenance

• Building Wiring Fault Indicator
  This LED informs users of potentially dangerous wiring problems in the wall circuit.

• Cold-start capable
  Provides temporary battery power when the utility power is out.

• Disconnected battery notification
  Warns when a battery is not available to provide backup power.

• Hot-swappable batteries
  Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

• Simple battery replacement
  Increases UPS availability by allowing quick, easy battery replacement.

• Transformer Block Spacing
  Connect bulky transformer block plugs without covering up other outlets.

• USB connectivity
  Provides management of the UPS via a USB port (not available on all models).

• Audible alarms
  Provides notification of changing utility power and UPS power conditions

• Automatic self-test
  Periodic battery self-test ensures early detection of a battery that needs to be replaced.

• Battery replacement without tools
  Enables fast battery replacement, lowering Mean Time to Repair (MTTR).

• Boost and Trim Automatic Voltage Regulation (AVR)
  Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).

• Building Wiring Fault Indicator
  This LED informs users of potentially dangerous wiring problems in the wall circuit.

• Catastrophic Event Protection
  SurgeArrest components such as MOVs and Thermal fuse ensure instantaneous reaction to lightning strikes and wiring faults. If the surge components are damaged due to power spike or over voltage, excess power cannot reach your equipment. Unlike the APC SurgeArrest products, most surge suppressors continue to let power through even after circuits have been damaged, leaving your equipment exposed to other damaging surges.

• Dataline surge protection
  Provides protection of connected equipment from power surges on the data lines.

• EMI and RFI noise filtering
  Reduces line noise that can cause data loss and keyboard errors.

• ENERGY STAR for UPS
  Establishes that the efficiency of the UPS is in the top 25% of the market as verified by third party testing

• Hot-swappable batteries
  Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

• LCD graphics display
  Text and mimic diagrams that display modes of operation, system parameters and alarms.

• Lifetime data recovery warranty
  Provides peace of mind by providing professional data recovery services in the event data is lost due to the failure of the unit.

• Performance Gaming Design
  Specially designed for performance gaming equipment, this battery backup protects gaming PCs, consoles and accessories from damaging power surges, interruptions and outages.

• PowerChute Personal Edition OS Compatibility
  This software supports numerous operating systems and processors. /a

• Sine wave output
  Eliminates humming and heat generated when powering tube lights and fans

• USB charging ports
  Simultaneously charge mobile devices, including smartphones and tablets.

• User-replaceable batteries
  Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

• Adjustable voltage sensitivity
  Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.

• Audible alarms
  Provides notification of changing utility power and UPS power conditions

• Automatic self-test
  Periodic battery self-test ensures early detection of a battery that needs to be replaced.

• Battery failure notification
  Provides early-warning fault analysis on batteries enabling timely preventive maintenance

• Battery replacement without tools
  Enables fast battery replacement, lowering Mean Time to Repair (MTTR).

• Battery-protected and surge-only outlets
  Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment

• Boost Automatic Voltage Regulation (AVR)
  Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.

• Building Wiring Fault Indicator
  This LED informs users of potentially dangerous wiring problems in the wall circuit.

• Cold-start capable
  Provides temporary battery power when the utility power is out.

• Dataline surge protection
  Provides protection of connected equipment from power surges on the data lines.

• Disconnected battery notification
  Warns when a battery is not available to provide backup power.

• Hot-swappable batteries
  Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

• Intelligent battery management
  Maximizes battery performance, life, and reliability through intelligent, precision charging.

• LCD graphics display
  Text and mimic diagrams that display modes of operation, system parameters and alarms.

• Lifetime data recovery warranty
  Provides peace of mind by providing professional data recovery services in the event data is lost due to the failure of the unit.

• Resettable circuit breaker
  Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)

• Safety-agency approved
  The UPS is UL1778 Listed

• Transformer Block Spacing
  Connect bulky transformer block plugs without covering up other outlets.

• USB connectivity
  Provides management of the UPS via a USB port (not available on all models).

• User-replaceable batteries
  Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

• Audible alarms
  Provides notification of changing utility power and UPS power conditions

• Building Wiring Fault Indicator
  This LED informs users of potentially dangerous wiring problems in the wall circuit.

• LED Indicators
  Provide easy-to-read status of the unit and utility power conditions.

• Audible alarms
  Provides notification of changing utility power and UPS power conditions

• Automatic self-test
  Periodic battery self-test ensures early detection of a battery that needs to be replaced.

• Battery failure notification
  Provides early-warning fault analysis on batteries enabling timely preventive maintenance

• Battery replacement without tools
  Enables fast battery replacement, lowering Mean Time to Repair (MTTR).

• Boost Automatic Voltage Regulation (AVR)
  Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.

• Building Wiring Fault Indicator
  This LED informs users of potentially dangerous wiring problems in the wall circuit.

• Cold-start capable
  Provides temporary battery power when the utility power is out.

• Dataline surge protection
  Provides protection of connected equipment from power surges on the data lines.

• Disconnected battery notification
  Warns when a battery is not available to provide backup power.

• Hot-swappable batteries
  Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

• Intelligent battery management
  Maximizes battery performance, life, and reliability through intelligent, precision charging.

• LCD graphics display
  Text and mimic diagrams that display modes of operation, system parameters and alarms.

• Lifetime data recovery warranty
  Provides peace of mind by providing professional data recovery services in the event data is lost due to the failure of the unit.

• Resettable circuit breaker
  Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)

• Safety-agency approved
  The UPS is UL1778 Listed

• Transformer Block Spacing
  Connect bulky transformer block plugs without covering up other outlets.

• USB connectivity
  Provides management of the UPS via a USB port (not available on all models).

• User-replaceable batteries
  Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

• Audible alarms
  Provides notification of changing utility power and UPS power conditions

• Automatic self-test
  Periodic battery self-test ensures early detection of a battery that needs to be replaced.

• Battery failure notification
  Provides early-warning fault analysis on batteries enabling timely preventive maintenance

• Battery replacement without tools
  Enables fast battery replacement, lowering Mean Time to Repair (MTTR).

• Boost Automatic Voltage Regulation (AVR)
  Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.

• Building Wiring Fault Indicator
  This LED informs users of potentially dangerous wiring problems in the wall circuit.

• Cold-start capable
  Provides temporary battery power when the utility power is out.

• Dataline surge protection
  Provides protection of connected equipment from power surges on the data lines.

• Disconnected battery notification
  Warns when a battery is not available to provide backup power.

• Hot-swappable batteries
  Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

• Intelligent battery management
  Maximizes battery performance, life, and reliability through intelligent, precision charging.

• LCD graphics display
  Text and mimic diagrams that display modes of operation, system parameters and alarms.

• Lifetime data recovery warranty
  Provides peace of mind by providing professional data recovery services in the event data is lost due to the failure of the unit.

• Resettable circuit breaker
  Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)

• Safety-agency approved
  The UPS is UL1778 Listed

• Transformer Block Spacing
  Connect bulky transformer block plugs without covering up other outlets.

• USB connectivity
  Provides management of the UPS via a USB port (not available on all models).

• User-replaceable batteries
  Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

• SmartConnect
  Innovative, easy to use remote monitoring feature that provides automatic notifications, firmware updates, and advanced support services.
• High online efficiency
  Reduces utility costs, generates less heat.
• Green mode
  Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
• Pure sine wave output on battery
  Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
• LCD Status Display
  Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
• Cold-start capable
  Provides temporary battery power when the utility power is out.
• Temperature-compensated battery charging
  Prolongs battery life by regulating the charge voltage according to battery temperature.

• The Uniquely Universal Host Cable
  The USB-C dock comes with a universal host cable that is designed with an attached USB-C to USB-A adapter to accommodate USB-A laptops. The cable also features an extended length of 1 meter (3.3 ft.) to support a wide variety of workstation setups. Replacement or extra cables can be purchased separately here.

• 100W Power Delivery
  For high performance laptops that require more charging power, the dock powers and charges your laptop as you work with 100W PD for faster charging, using the 150W power adapter - all through a single cable.

• Flexible Monitor Connections
  This is a dual 4K60Hz video docking station with support for both Ultra HD DisplayPort and/or HDMI monitors that lets you configure your video connections to best suit your needs. •Text | Dual 4K DisplayPort | Up to 4096 x 2160p @ 60Hz •Text | Dual 4K HDMI | Up to 4096 x 2160p @ 60Hz •Text | Single 4K DisplayPort + Single 4K HDMI | Up to 4096 x 2160p @ 60Hz •Text | Single 5K DisplayPort * | Up to 5120 × 2880 *Requires monitor support for 5K using two DP ports

• Certified for Universal Compatibility & Reliability
  This docking station is fully certified to meet top industry standards for USB-IF (USB 3.1 Gen 1, USB Type-C and Power Delivery), VESA DisplayPort and DisplayLink (video connections) certification to guarantee the highest quality, reliability, and compatibility.

• Easy and Convenient Setup
  For fast setup right out of the box, the combo cable (USB-C with attached USB-A adapter) lets you connect any laptop. The dock has mounting holes for workstation mounting (bracket not included).

Features

• A powerstation AC

• 1 0.5m USB-C to USB-C cable